testttt

Leading playout automation for 25 years

In the ever-evolving broadcast industry, choosing the right playout automation provider is crucial. Sally Wallington, Pebble SVP of Sales, shares her expertise on what broadcasters must consider to ensure they select a system that truly fits their needs.

A quarter of a century ago, playout automation was already a well-established technology, but it looked very different from today’s sophisticated systems. Back then, automation was primarily about device control – dedicated real-time hardware sending commands over serial busses to a variety of devices, many of which had only limited functionality. 

Virtually all content was on tapes inside robot libraries, so the automation had to be constantly looking ahead to ensure the right tapes were loaded into the players and calculating pre-rolls. For economy, some broadcasters put multiple spots on each tape, which meant the automation had to compile breaks during the previous programme segment. It was all very exciting. 

One could argue that today’s playout automation – dealing with networked devices and servers which provide instant start to all the content required – is much simpler. But other challenges have arisen: where the turn of the century playout system would handle a single channel, now the expectation is for multiple variants of each service, to meet localisation needs and international legal variations. Individual operations have been replaced in many cases by playout centres handling hundreds of channels. 

Pebble’s founders had already been deeply involved in playout automation for years, shaping earlier generations of the technology. They knew what was really important for users, and when they started the business they established a set of principles for excellence. Those same guidelines continue to drive Pebble’s approach today, ensuring its solutions evolve to meet the demands of modern playout. 

Playout automation is mission-critical. If a broadcaster cannot deliver programmes it has no audience; if it cannot deliver commercials it has no revenue. Interruptions to programmes cause reputational damage; dropping commercial spots means no income. Together, they pose a serious risk to a broadcaster’s success. 

So in choosing an automation supplier, a broadcaster must first of all identify the vendor who understands the issues involved, can demonstrate proven solutions, and, perhaps most important, can develop long-term relationships to ensure that support will always be there, whatever the future challenges. 

What are the issues for playout systems? Most important is reliability. In the modern, software-centric environment five nines reliability – 99.999 per cent up time – is the absolute minimum expectation, and six nines should probably be the goal. 

That means stable software on redundant hardware and communications networks, with no single point of failure and large margins of excess processor power, network capacity and storage space. 

Second, agility. No two workflows are the same, and the playout vendor should not be dictating how a broadcaster works. The software should adapt readily to the best configuration for the application. Completely flexible and reliable interfaces, preferably based on open standards, should allow for connection to best of breed devices from any other vendor where required. Integrated channel platforms still need ready integration, to storage networks and to planning and monitoring systems. 

Third, the system should be supportive. Where operator interventions are required, they must be intuitive and logical. Above all, it should be impossible to do something wrong. Anyone in the broadcast industry will be familiar with disastrous mistakes in the playout suite, where the output has been switched at a critical moment. Your networks should never be subject to such dangers. 

Finally, it must be secure. Cyberthreats are the modern world’s nightmare, and any mission-critical technology must be hardened against challenges, with protections continually updated as the bad guys come up with fresh ideas. 

Pebble was founded in 2000 on the basis of delivering the most trusted, reliable and feature-rich playout technology. That remains true today.

This article was originally published in TVBEurope.

### ENDS ###

testttt

Pebble provides playout for SRF facility

Epsom, Surrey, UK, 18 March 2025: Pebble, the leading automation, content management and integrated channel specialist, has completed the development and implementation of the playout functionality for Swiss national broadcaster, SRF. The project involved collaboration with multiple vendors to achieve seamless workflows in the all-IP environment. 

SRF has relocated to a purpose-built headquarters in Zurich. A key element of the project is to take advantage of next-generation workflows and operational practices by leveraging modern, standards-based technologies. The result is one of the largest media environments using interworking SMPTE ST 2110 equipment in Europe. 

Central to the new facility is secure and highly resilient playout of the three premium channels in German-speaking Switzerland: SRF 1, SRF zwei and SRF info. The multiple variants of these channels, to meet the needs of different delivery platforms, are managed and played out using Pebble Integrated Channel software devices, under the control of the proven Pebble Automation. 

Vital to the project was the integration of the playout system into the wider media and information flows across the IP networks. As content is required it is pulled from central storage servers into the Integrated Channel devices. To achieve this seamless integration, the whole environment using the NMOS protocol from AMWA as the interface. 

As well as pre-recorded content, the Pebble system also routinely delivers live content, accepted directly into the Integrated Channel software appliances. Drawing on information from the scheduling system and elsewhere, Pebble Automation adds live graphics as required, by controlling VizRT graphics, running as plug-ins. Audio processing includes channel management, Dolby E and loudness monitoring and control. 

“This has been a highly trustful collaboration between SRF and Pebble,” said Martin Sauter, Project Manager at SRF. “Pebble understood the challenges we faced and sought to work with us closely every step of the way to achieve the common goal of a successful ST 2110 playout centre that fulfils our needs.” 

Sally Wallington, SVP Sales at Pebble added “This has been a complex project, with not only requirements and workflows developing along the way, but the entire foundation of SMPTE ST 2110 and NMOS coalescing to give us the practical tools we need for seamless interworking. Thanks to the professionalism as well as the enthusiasm of the SRF engineering team, it was immensely satisfying for us. Everyone from Pebble who worked on it sees the new Zurich centre as a tremendous achievement and we are very proud to have played our part.” 

For more information, see www.pebble.tv

### ENDS ###

testttt

Pebble celebrates 25 years of expertise in playout automation

Epsom, Surrey, UK, 5 March 2025: Pebble, the leading automation, content management and integrated channel specialist, is celebrating its 25th anniversary this year and will be present at NAB Show (booth W2135, Las Vegas Convention Center, 6-9 April). This anniversary is even more meaningful as it aligns with television’s centenary, marking 100 years since John Logie Baird’s first demonstrations in 1925.

“The company’s founders recognised that playout is mission critical, so the automation system has to be feature rich, secure and reliable,” said Peter Mayhead, CEO of Pebble. “25 years on, we have developed a highly capable and flexible set of solutions, which we continue to implement with leading broadcasters worldwide.”

Pebble specialises in enterprise-wide playout automation, designed to scale effortlessly from a single channel to the largest multi-service facility. Automation 2.0, the next generation of its highly flexible and feature-rich management software, provides seamless control over both modular playout architectures and the all-in-one Integrated Channel engine. Seamlessly supporting SDI, SMPTE ST2110 and NDI content flows, these technologies help broadcasters navigate through industry transitions.

Recognising that, increasingly, broadcasters and service providers are looking to work across multiple sites and hybrid operations, Pebble also offers Remote. This web-based monitoring and control environment gives secure monitoring and management of channels from inside or outside the normal transmission facilities.

Specialising exclusively in playout and media workflows, Pebble’s 25 years of investment in innovation has resulted in powerful, flexible technology that adapts seamlessly to evolving broadcast needs. The solution is also highly resilient, and it’s widely regarded as the most reliable playout technology in the industry. High levels of security are built into the software, and Pebble has been awarded the Cyber Essentials Certificate of Assurance.

“For 25 years, Pebble has been at the forefront of playout automation, providing broadcasters with the resilient, adaptable, and innovative technology they need,” Mayhead said. “NAB has always been an important opportunity for us to discuss our solutions in detail with broadcasters. This year, as we celebrate this milestone, we want to showcase our continued leadership in playout automation and our commitment to innovation and product development. We look forward to engaging with the industry and strengthening these discussions.

Meet Pebble at NAB Show, booth W2135, and find more information at www.pebble.tv

### ENDS ###